The Start
It starts from POLLUTION. It starts people / government finally realised that the earth, the land, the water, what they live, or the living based on have been destroyed. Then late but rather than none, law comes, to list the standard we should follow, the limit of deposit we can dump. In China, seems they also realised that it is already too late for protecting the environment, the law is quite strict on the drilling waste management, the standard is even higher than other developed countries. Drilling fluid have been list in the quite dangerous fluid, and the fluid after treatment have to comply with the waste water recycle regulations. Though the technique now in China is not developed that well, it is already a big step.

The Main Equipment
The main and initial equipment including Hi-G shaker, Verticle cuttings dryer, and decanter centrifuge. For most of the applications, if water based mud, the first step is collect all the drilling cuttings from shale shaker, mud cleaners to the Hi G shaker. If oil based mud, then to the vertical cuttings dryer. Then fluid after these two equipment will be pumped to the decanter centrifuge.
Hose Pump, Screw Conveyor, are normally used for transferring the solids / drilling waste from one stage to another stage, depends on the drilling site arrangement. GN Solids Control is offering modular transferring solutions.
The Better Solution
Except the basic solution, if need better result, cleaner fluids, cleaner water, dryer solids, which can be dumped or reused. Then the other intrestesting equipment will be used.
Dewatering system
Normally used after or before the decanter centrifuge, to improve the result from the decanter centrifuge, if after the centrifuge in drilling waste management progress then also need another decanter. GN Solids control have the containerised dewatering unit as optional offer.
Solidification
For water based drilling waste, the final step for solids is dump, normally. Then solidification is also a normal choice, GN solids control is offering the solidification unit which have been used for a lot of the site.
TDU Thermal Desperation Unit
If more complex drilling waste management site, especially when we need recycle water, oil, and reuse solids waste, then the TDU will be a good option, as that what she will do. GN Solids Control is testing it in 2016, and will face the world soon. Keep tune.

On the rig site, if you ever see the big giants, except rig itself, then you can find mud tanks, surrounding the rig, and catching eye sights. While all the professionals know that, though it is not just a steel box, or a simple container, still have a lot of engineering work. It is definitely not deserve to spend several times money for them to travel all the world. Nowar days, as oil price goes down, the market is being more and more quiet than before. Saving/ economic purchasing is more important then ever before. And if possible to fabricate good tanks locally, will definitely change the situation, and being competitive.

So if you are a tank supplier, pls feel free to get in touch with GN.
Recently GN have sent a full set solids control equipment to Russia, which contains:

1) 4 sets of shale shaker, GNZS594E-HB.
This shale shaker is 4 panel shakers with big treating capacity, working performance equivalent to USA brand shakers. The vibration motor can be 1.72kw /1.94kw for option, G force is adjustable by adjusting the eccentric block inside of the vibration motor.

2) 2 sets of decanter centrifuge, GNLW363CG
The client buy two sets of same model centrifuge GNLW363CG for easier operation and less spare parts stock. The centrifuge is high speed centrifuge can reach 3200RPM, and G force 2062@3200RPM. We can also match lower speed pulley with belt per client's request.

3) 20 sets of centrifugal pump

For Russia market, this is not the first time we cooperated with local tank suppliers, there are several companies like GN products, and doing the fabrication sometimes refer to GN designs.
For other countries, we also have a lot of tank suppliers working as partners for projects. And some of them we are working even closer to do marketing etc.

Increase your environmental friendly drilling efficiency with GN products, one of the most important equipment is the Solidification / Stabilisation unit. The drill cuttings solidification unit is advanced and unique, which is quite flexible comparing the waste cuttings solidification plants.

Solidification – Is an absorption process where contaminants, typically oils, are taken into the absorbent material in the same way a sponge takes on water. In general, solidi cation is the addition of absorbents such as soil, y ash, kiln dust, cement, clays or sawdust to the drilling waste. The solidi ed product will have improved properties such as strength, compressibility and a reduced permeability.

Stabilisation – Is an adsorption process whereby contaminents are electrochemically bonded to the stabilising agents. Contaminants that are stabilised within the matrix are less likely to be released into the environment. This process is particularly relevant to the stabilisation of heavy metals and oils that would otherwise be rapidly available to the environment through leaching.

The adeptness to coalesce or stabilise a accurate decay beck and the e ectiveness of the analysis is abased on the decay blazon and analysis reagent factors. Typically, adumbrative samples of the decay are class activated to actuate the a lot of acceptable conception above-mentioned to eld implementation. Selection of the conception is commonly based on key belief such as leachate superior and backbone of the nal product.

Solidification and stabilisation generally requires the use of specialised accessories and actinic reagents. The processes absorb signi deceit abstracts administration upstream and after of the bond unit. Some decay streams may accommodate contaminants that can arrest the solidi cation/stabilisation processes.

For the solidification / stabilisation action to yield abode it is important to carefully adviser the decay produced at the rigsite for levels of alkali baptize and oil. This will advice to minimise the use of reagents and optimise the process, thereby abbreviation costs and the ecology impact.

Thus, it is with the accomplishment and ability that Scomi Oiltools has developed over the endure 20 years that allows us to, accommodate safe, amount e ective and environmentally complete solidi cation and stabilisation processes.

GN Solids Control Co., Ltd continues to be production shale shakers, mud cleansers, desanders, desilters, decanter centrifuge, cuttings dryers and mud systems for since the institution. Most of GN solids control and drilling waste management systems are using outside China and taiwan, which are using in around 60 countries.
GN Solids Control equipments have been improving since the establishment. Every year, GN engineers modify and update their solids control in addition to drilling cuttings management devices to treat OBM, WBM as well as SBM aiming for a better in addition to better result.
GN companies various shale shakers with regard to using in different worksites, for instance oil and gas drilling, horizontal going, dredging, mining etc . Over these usages, GN also offers shakers for diamond going or core drilling.
GNZS752E-DM is one of the most popular shakers to split up mud in diamond going. This type of shaker is pretty lightweight and convenient to move. Typically, the diamond drilling as well as core drilling are mainly applying small equipments which can be brought be a helicopter. Because the majority of the drilling sites is miles away from urban area and also there’s barely no highway to transport these equipments having a truck.
GN 752 shaker is mainly used in the stone drilling or core going for remote areas. Often the treating capacity is two hundred GPM which can meet the majority of the demands. There are only a couple of pieces of  shale shaker screens put together on this shaker. The weight is simply 893 kg.

In order to fulfill the demands of the weight limitation for shakers, GN shale shakers can be modified by simply disassembling shaker bottom or even feeding box. The sto? motors are world famous companies such as Martin or OLI. G force is also flexible (usually it’s 7. one G).
GN Solids Control also provides mini decanter centrifuge to separating out and about finer solids after addressed by GN mini shaker. GN mini decanter centrifuge has a 9 inch spinning bowl. Rotating speed actually reaches to 4500 RPM to be able to separating finder solids.