Blue Flower

Equipment Performance & Application Advantages

As the first-phase solids control unit, the GNZS595 linear motion shale shaker delivers a reference processing capacity of 175m³/h with a maximum G-force of 7.5G, effectively separating coarse drill cuttings from the drilling fluid at the primary stage. The entire shaker deck undergoes heat treatment to relieve welding stress and withstand sustained high vibration loads. It is equipped with Italian OLI brand vibration motors, stainless steel bottom frame and explosion-proof electrical control panel, ensuring robust durability and corrosion resistance under harsh drilling site conditions. The mechanically adjustable deck angle and quick-tensioning screen design enable flexible on-site adjustment to match varying flow rates and drilling fluid properties.2026.11.10 Shale Shaker

The GNZJ594K-3S16N mud cleaner integrates desander hydrocyclones, desilter hydrocyclones and an underflow shale shaker into a single compact skid, performing both second-stage sand removal and third-stage silt separation. The unit is fitted with 3 pieces of 10-inch desander cones and 16 pieces of 4-inch desilter cones, providing a rated treating capacity of 360m³/h under a working pressure range of 0.25 to 0.4MPa. The underflow linear motion shaker further dewaters the separated solids to minimize valuable drilling fluid loss carried by discharged cuttings. This integrated configuration reduces rig floor space occupation and simplifies on-site installation and routine maintenance compared with standalone desander and desilter units.

The two GNLW363D-FHD full hydraulic drive decanter centrifuges serve as the final fine solids purification stage of the system. Featuring a premium Switzerland hydraulic drive system, the unit supports stepless adjustment of bowl speed and differential speed during operation, offering excellent adaptability to high-viscosity heavy mud and high-temperature ambient environments. The centrifugal cast duplex stainless steel 2304 bowl and tungsten carbide tile protected screw ensure outstanding wear resistance and long service life. With a maximum processing capacity of 45m³/h and a separation point of 2 to 5 micrometers, it effectively removes ultra-fine low-gravity solids, stabilizes mud weight and viscosity, and significantly reduces drilling fluid consumption and waste discharge volume.2026.11.10 FHD Decanter Centrifuge

The complete four-stage solids control train forms a closed-loop mud treatment workflow, maintaining optimal drilling fluid rheological properties throughout the deep well drilling process, extending downhole tool service life and lowering overall operation costs. As an API and CE certified manufacturer with a global service network, GN Solids Control will continue to provide full technical support and after-sales service to ensure the smooth operation of the project.