On the rig site, if you ever see the big giants, except rig itself, then you can find mud tanks, surrounding the rig, and catching eye sights. While all the professionals know that, though it is not just a steel box, or a simple container, still have a lot of engineering work. It is definitely not deserve to spend several times money for them to travel all the world. Nowar days, as oil price goes down, the market is being more and more quiet than before. Saving/ economic purchasing is more important then ever before. And if possible to fabricate good tanks locally, will definitely change the situation, and being competitive.

So if you are a tank supplier, pls feel free to get in touch with GN.
Recently GN have sent a full set solids control equipment to Russia, which contains:

1) 4 sets of shale shaker, GNZS594E-HB.
This shale shaker is 4 panel shakers with big treating capacity, working performance equivalent to USA brand shakers. The vibration motor can be 1.72kw /1.94kw for option, G force is adjustable by adjusting the eccentric block inside of the vibration motor.

2) 2 sets of decanter centrifuge, GNLW363CG
The client buy two sets of same model centrifuge GNLW363CG for easier operation and less spare parts stock. The centrifuge is high speed centrifuge can reach 3200RPM, and G force 2062@3200RPM. We can also match lower speed pulley with belt per client's request.

3) 20 sets of centrifugal pump

For Russia market, this is not the first time we cooperated with local tank suppliers, there are several companies like GN products, and doing the fabrication sometimes refer to GN designs.
For other countries, we also have a lot of tank suppliers working as partners for projects. And some of them we are working even closer to do marketing etc.

Increase your environmental friendly drilling efficiency with GN products, one of the most important equipment is the Solidification / Stabilisation unit. The drill cuttings solidification unit is advanced and unique, which is quite flexible comparing the waste cuttings solidification plants.

Solidification – Is an absorption process where contaminants, typically oils, are taken into the absorbent material in the same way a sponge takes on water. In general, solidi cation is the addition of absorbents such as soil, y ash, kiln dust, cement, clays or sawdust to the drilling waste. The solidi ed product will have improved properties such as strength, compressibility and a reduced permeability.

Stabilisation – Is an adsorption process whereby contaminents are electrochemically bonded to the stabilising agents. Contaminants that are stabilised within the matrix are less likely to be released into the environment. This process is particularly relevant to the stabilisation of heavy metals and oils that would otherwise be rapidly available to the environment through leaching.

The adeptness to coalesce or stabilise a accurate decay beck and the e ectiveness of the analysis is abased on the decay blazon and analysis reagent factors. Typically, adumbrative samples of the decay are class activated to actuate the a lot of acceptable conception above-mentioned to eld implementation. Selection of the conception is commonly based on key belief such as leachate superior and backbone of the nal product.

Solidification and stabilisation generally requires the use of specialised accessories and actinic reagents. The processes absorb signi deceit abstracts administration upstream and after of the bond unit. Some decay streams may accommodate contaminants that can arrest the solidi cation/stabilisation processes.

For the solidification / stabilisation action to yield abode it is important to carefully adviser the decay produced at the rigsite for levels of alkali baptize and oil. This will advice to minimise the use of reagents and optimise the process, thereby abbreviation costs and the ecology impact.

Thus, it is with the accomplishment and ability that Scomi Oiltools has developed over the endure 20 years that allows us to, accommodate safe, amount e ective and environmentally complete solidi cation and stabilisation processes.

GN Solids Control Co., Ltd continues to be production shale shakers, mud cleansers, desanders, desilters, decanter centrifuge, cuttings dryers and mud systems for since the institution. Most of GN solids control and drilling waste management systems are using outside China and taiwan, which are using in around 60 countries.
GN Solids Control equipments have been improving since the establishment. Every year, GN engineers modify and update their solids control in addition to drilling cuttings management devices to treat OBM, WBM as well as SBM aiming for a better in addition to better result.
GN companies various shale shakers with regard to using in different worksites, for instance oil and gas drilling, horizontal going, dredging, mining etc . Over these usages, GN also offers shakers for diamond going or core drilling.
GNZS752E-DM is one of the most popular shakers to split up mud in diamond going. This type of shaker is pretty lightweight and convenient to move. Typically, the diamond drilling as well as core drilling are mainly applying small equipments which can be brought be a helicopter. Because the majority of the drilling sites is miles away from urban area and also there’s barely no highway to transport these equipments having a truck.
GN 752 shaker is mainly used in the stone drilling or core going for remote areas. Often the treating capacity is two hundred GPM which can meet the majority of the demands. There are only a couple of pieces of  shale shaker screens put together on this shaker. The weight is simply 893 kg.

In order to fulfill the demands of the weight limitation for shakers, GN shale shakers can be modified by simply disassembling shaker bottom or even feeding box. The sto? motors are world famous companies such as Martin or OLI. G force is also flexible (usually it’s 7. one G).
GN Solids Control also provides mini decanter centrifuge to separating out and about finer solids after addressed by GN mini shaker. GN mini decanter centrifuge has a 9 inch spinning bowl. Rotating speed actually reaches to 4500 RPM to be able to separating finder solids.

It is very strange that China even have more strict environmental requirement on the dredging field than all over the world, on the waste solids disposal and also the fluid dump, no matter how it have been applied on field, in paper it is really advanced. So basically when the oil market is down, we get a chance there, some client in dredging field said. Just like you have done in waste management field. Also we have realised that not only china all over the world, people are taking more care on the environmental protection. For dredging, what we need is:
Recycle the cleaner fluids.
Dump and reuse as much as possible on the solids.

Not like the oil gas drilling, from the pond, or from the river, from sea, there are sands, rocks, and other things as you can imagine which have been buried in it. So the separation seems very different. Except the basic concepts.

Separate the biggest particles and other stuff other than the sands and silts. There are many ways to do this, one is dig another pit / pond, with at big screen from where dredging pump feeds, let the screen separate unreasonable parts to the pond, keep them away from the progress. Another way is gumbo box, it is quite same as the mining applications, to separate the biggest rocks from the first step, then others feeding directly to the shale shaker.

Then directly, or by another pump from the pond. The feeding goes to the double deck shaker. In GN, it is GNZS706E, which is good to separate the bigger sands and the most of the bigger solids. going through two sieves.

Catched by the pump, feeding to the cyclones, to get the silts separated.
Then in the same way, separated by the decanter centrifuge. 

Sometimes it also need help from chemicals that why a flocculent unit is there. To concentric the small particles to be bigger ones, then easier to be separated.

Kindly contact GN for a full solution.