Solids control is one branch of solids-liquid separation industry. Most time solids control means the separation equipment for drilling mud in oil gas industry or construction industry. The core equipment of solids control include the shale shaker ,mud cleaner ,degessor, some times also need to equipped Decanter centrifuge. GN solids control is one wide know branch in the wold which has more than 15 years experience of solids control equipment designing and manufacture. Last week we shipped desander , desilter and degessor to China client for drilling project.

In most project, the first separation equipment is shale shaker, but for some special project, due to the particle size is very small, the shaker can not remove them well, so we will cancel the shale shaker and directly feed slurry to desander and then desilter. Both desander and desilter through the cyclone to remove out solids. The high speed slurry flow into cyclone, and generate the whirlwind, the solids and liquid will be separate away under the different separation force. The clean liquid will discharge out from the top of cyclone.

One other important equipment is degessor. It was installed before desander. In drilling process, the mud will be mixed with some air from stratum. The air will reduce the mud density and also the property. we must to remove out air to keep the mud property. GN degessor can mix the mud and also minus pressure space to push the involved air out mud. Degessor not only remove out air but also mix mud to improve the mud property. This desander desilter and degessor all were be designed and manufactured by GN. We not only provide equipment, and also good at design and manufacture customized mud system and solids control system. Currently we exported more than 76 countries and served more than 5000 client from all over the world. If your project have demand on solid control equipment, welcome to contact us.