GN Solids Control manufactures different kinds of transfer pumps includes vacuum pump, centrifugal pump, screw pump and submersible pump. GN made vacuum pumps are largely used to transfer all the flow-able materials such as oil sludge, drilling cuttings, waste slurry, concrete materials, animal wastes and dredging slurry etc.
Last month we shipped 2 sets of vacuum pump to a African customer: one 20 m3/h and one 40 m3/h flow rate. GN Solids Control also manufactures 10 m3/h vacuum pump. The 10B and 20B are both portable model which are fixed with wheels that can be moved easily, while the 40B is the largest model that protected by supporting and lifting skid and pad.
GN Solids Control vacuum pump is able to transfer larger particles less than 75 mm. Solids contend up to 80% can be transferred. And the largest distance is 1000 m.
GN Solids Control vacuum pump is an air driven pump that need to connect with an air compressor when working. As long as the suction distance is less than 8m, it’s absolutely OK for GN vacuum pump to suck and transfer any kinds of large density or viscosity slurry.
In order to suit customers’ demands well, GN Solids Control also provided several different types of discharge tools. Two typical tools are rotating feeder which is mainly used to discharge to a cuttings box or to an afterwards treating equipment like cuttings dyer, the other one is triple skip station which is used to distribute slurry into multiple cuttings boxes.
GN Solids Control also provides mini vacuum cleaner, it a GN vacuum pump fixed with a wide suction inlet. As we know, spilled sludge in the rig site is very difficult to clean, but by using GN mini vacuum cleaner, it can clean ground easily without to much labour work.