GN Solids Control manufactures different models transfer pumps or conveying equipment. As long as the materials can be moved, they can be transferred by GN pumps.
There are many pumps distributors are selling pumps that made by GN Solids Control. Today we would like to share several pumps we provided to our customers.
1.GN Centrifugal Pump
GN made centrifugal pumps are replaceable with NOV Mission Magnum pumps. GN centrifugal pumps are widely used in move different slurry. In the solids control and waste management treating area, GN centrifugal pumps are largely used to feed drilling mud into GN desanders and GN desiltes as well as GN Mud Cleaners.
Centrifugal pumps are wearable pumps, they wear fast when the slurry has too much solids inside. Pump shell and impeller must take extra protection process in order to run for a long time.
2.GN Screw Pump
GN Screw pump is also called GN positive displacement pump. This pump has a very large push force for high density drilling mud. It’s mainly used as a feeding pump of the decanter centrifuge.
Screw pump can not be used when there are too much solids (over 30%), it will get blocked easily. So a GN shale shaker must be used if there are too much solids.
3.GN Submersible Pump
GN Submersible pump is mainly used to transfer slurry with high content solids and larger particles. It can be also used as a feeding pump for GN decanter centrifuge.
4.GN Vacuum Pump
GN Vacuum Pump is a newly developed equipment to transfer all materials to a long distance (max. 1000m). Different with the above mentioned pumps, GN vacuum pump is driven by air force. If those above pumps need to consider the explosion-proof standards, then you don’t need to worry about GN vacuum pump. But you will need to use an air compressor to provide enough air to driven the vacuum pump for sure.