GN Solids Control is an expert which is especially good at providing solids and liquid treating systems. In the past several years, GN Solids Control has provided thousands of whole treating systems. As we know, GN Solids Control manufactures excellent shaker screens with the most cost-effective price. Worldwide drilling contractors are willing to choose GN shaker screens after they tested and compared with OEM screens.
Beside GN made shaker screens, GN Solids Control also provides the most excellent turk-key solutions for various of solids and liquid separation. For each slanted tank (we have a total of 5, we need to provide a level platform for the agitators):
Three 20 HP motors, gearbox and agitator shaft (3 different lengths for slanted tanks), 1 impeller at 37.4 inch, and 1 impeller at 31.5 inch; inclusive of other small connecting pieces. Impeller size is 37.4inch and 31.5inch, we will need your help to advise the shaft length separately (length will be effected by the postion you fixed on the top of the mud tank when using the leveal platform. But it will not affect the price). FYI, the voltage is 480V, 60Hz, 3phase.
3 Industrial cords from mud agitators to control box on the front. Control box (similar to what we have on MUD tank, see photo), with 3 buttons ON and OFF for 3 agitators, ADD one button for setup of potential pump to remove materials. Inclusive of main breaker for incoming feed at 150 to 200 Amps? Confirm, we can add the potential pump. Control box price will be 1195usd/set.
Industrial cord to main break panel...to be provided, let me know if you have a preferred connector such as what is used for other clients (Powermate? or other connector, to make a quick connection with a potential independent generator. We are using China brand fast connector, some pairs of male and female connector can be provided so you will have a quick connection. We have 1 NON-slanted tank (which I provided earlier, with a 18 inch step.)