As a branch company of GN Solids Control, GN Solids America LLC has been in Houston, TX for almost 4 years. Although GN Solids America LLC is still a baby company, with the great help from GN Solids Control, GN Solids America is getting known by more and more solids control and waste management customers.
Now GN Solids Control manufactures 9 inch centrifuge, 14inch centrifuge, 18inch centrifuge, 22inch centrifuge and 30 inch centrifuge. Different models can be used in different areas due to the treating volume and G force differences.
Such as the barite recovery, most of the solutions we provided to our customers are dual centrifuge systems, sometimes 3 centrifuges might needed. Here is one typical (probably the most cost effective) barite recovery solution:
1. One 18inch middle rotating speed centrifuge GNLW452 (815 G force @1800 rpm), this is used to recovery barite or separate out High gravity solids.
2. One 14inch high rotating speed centrifuge GNLW363 (2062 G force @3200RPM), this is for separating out low gravity finer solids.
Frankly speaking, GN 30inch centrifuges are mainly used on TBM drilling slurry separation or some other industry slurry treatment areas. Treating capacity is 528GPM (mud with 20% solids). It's not common to use it in the oil and gas area as they don’t have such large drilling rigs.
GN Solids Control has provided centrifuges to more than 60 countries, with the successful usage by many large customers such as Shell, Baker Hughes, Bariod etc. If you are looking for the small centrifuge like 14inch, 18inch and 22inch, we do can provide you with hundreds of successful projects. According to our former experience, when the mud weight below 11ppg almost all the customers are not collecting them.
Now GN Houston warehouse has many centrifuges in stock, welcome to check our Houston warehouse for your decanter centrifuge needs.