GN Solids Control just exhibited several vacuum pumps in CIPPE show, and in the coming Houston OTC show, GN Solids Control will also exhibit a vacuum pump.
GN made vacuum pump is mainly used to transfer oil sludge which has high solids content as well as large viscosity.
GN Solids Control manufactures 3 different models vacuum pumps, include 10 m3/h, 20 m3/h and 40 m3/h. GN Solids Control manufactures different types of feeding pumps, such as screw pump, centrifugal pump, submersible pump. Most GN pumps are electrical driven or hydraulic driven, while for the vacuum pump it’s air driven. Need to use an air compressor to provide constant air, different models need different air feeding flow rate.
GN vacuum pump can work continuously, 2 control methods: manual control or automatic control. The 10 m3/h and 20 m3/h vacuum pump are both fixed with wheels for convenient move, and the 40 m3/h vacuum pump is fixed and strengthened by a frame which can be moved by forklift. The max. Size particles can be transferred by vacuum pump is 75 mm with the solids content of 80%.
GN vacuum pump suck and discharge every other seconds, in order to work continuously, several different vacuum pumps can be matched together to work as a whole unit. Last year, GN Solids Control provided 2 sets whole systems that working an offshore drilling rig sites. Each set has 4 sets vacuum pumps and all put in one 40FT size container.
Based on the transferred material or slurry, GN Solids Control provides different pump materials, such as the contact fact of the inlet and outlet as well as the air valve are optional for SS 316, and the whole pump shell can be also made by SS 316.
Feel free to connect with us if you have some headache when trying to move some sludge, GN vacuum pump probably be your best choice.