GN500GPM TBM mud treatment system is designed and manufactured according to clients’ requirements. Its handling capacity is 500GPM. This system is composed of two classes solids control equipments. While at the same time, three times separation, the first phase is double deck shaker, first the dirty drilling mud comes to the coarse screens, then to the normal 40mesh screens.

• First class: 1 sets GNZS706E-HB linear motion shale shaker for sieving seperation;

• The second class : 1 set GNZJ703E-8N mud cleaner and 1 set GNSB6×5-12J sand pump. Its main principle is adopting sand pump to supply enough power for hydrocyclones, then ,drilling fluids can be under centrifugal separation through hydrocyclone cones;

• Meanwhile, install 1 set GNSLS35A jet mud mixer in the tank. By this mean, it can add and mix mud to supply satisfied drilling fluids for drilling rigs.

Main function & features

1. this system consist of 2 classes solids control processing.:a.shale shaker sieving separation ; b. desilter hydrocylone separation can discharge most particles size more than 20μm in drilling fluids.
2. Adapted shaker screen for GNZS706E-HB linear motionl shale shaker: First deck coarce screen: 750*900mm, 3mm seive wiring, Second deck: 1250×700mm ，40―100 mesh shaker screens. Adapted under fluids shaker screen for GNZJ703E-8N mud cleaner 1250×700 ，100～180 mesh stainless steel frame screen.